Cisco CWDM-SFP10G-1330-20 Compatible 10G 1330nm CWDM SFP+ 20km DDM LC SMF Transceiver
Cisco CWDM-SFP10G-1330-20 Compatible 10G 1330nm CWDM SFP+ 20km DDM LC SMF Transceiver
Cisco CWDM-SFP10G-1330-20 Compatible 10G CWDM SFP+ Transceiver Module (SMF, 1330nm, 20km, LC, DOM)
The CWDM-SFP10G-LR series SFP+ optical transceiver is equipped with an LC duplex connector, reaching a link up to 20km over G.652/655. This 10G CWDM SFP+ transceiver, operating at a CWDM wavelength from 1270nm to 1610nm as specified by the ITU-T, is designed to deploy in the CWDM networking equipment in metropolitan access networks or campus networks. F-tone manufactured 10GBASE-CWDM SFP+ transceiver module is complaint with the SFF-8431 MSA and SFF8432 MSA. It's also fully compatible with almost all Cisco devices.
Model Name: | CWDM-SFP10G-1330-20 | Vendor Name: | F-tone |
Form Factor: | SFP+ | Data Rate: | 9.95 to 11.3Gb/s bit rates |
Wavelength: | 1330nm | Distance: | 20km@G.652 |
Connector: | LC Duplex | Cable Type: | OS2 SMF |
Transmitter Type: | DFB | Receiver Type: | PIN |
TX Power: | -5~0dBm | Receiver Sensitivity: | <-15dBm |
Power Consupumtion: | <1.5W | Modulation Format: | NRZ |
DDM: | Support | Bit Error Ratio (BER): | 1.00E-12 |
Protocols: | IEEE 802.3ae, SFF-8472 | Warranty: | 5 Years |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Share
About F-tone Networks
F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.