Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DDM LC MMF Transceiver Module
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DDM LC MMF Transceiver Module
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ Transceiver Module (MMF, 850nm, 300m, LC, DOM)
The Cisco SFP-10G-SR compatible SFP+ optical transceiver is equipped with an LC duplex connector, reaching a link up to 300m over OM3/OM4. F-tone manufactured 10GBASE-SR SFP+ transceiver module is compliant with SFP+ MSA, IEEE 802.3ae, SFF-8472. Besides, DDM (digital diagnostics monitoring) function is supported on the 10G fiber optic transceiver to achieve real-time operating parameters monitoring. This 10G SFP+ transceiver caters to the data center, campus network, enterprise core layer, and distribution layer, etc. It's also fully compatible with almost all Cisco devices.
|
Model Name: |
SFP-10G-SR |
Vendor Name: |
F-tone |
|
Form Factor: |
SFP+ |
Data Rate: |
10Gbps |
|
Wavelength: |
850nm |
Distance: |
|
|
Connector: |
LC Duplex |
Cable Type: |
OM3/OM4 MMF |
|
Transmitter Type: |
VCSEL |
Receiver Type: |
PIN |
|
TX Power: |
-6.5~-0.5dBm |
Receiver Sensitivity: |
<-11.1dBm |
|
Power Consumption: |
<0.8W |
Modulation Format: |
NRZ |
|
DDM: |
Support |
Bit Error Ratio (BER): |
1.00E-12 |
|
Protocols: |
IEEE 802.3ae, SFF-8472 |
Warranty: |
3 Years |
10G Fiber SFP+ Model Contrast Table
|
Part Number |
FT-SFP+-T FT-SFP+-IT |
FT-SFP+-T-80 |
FT-SFP+-SR |
FT-SFP+-IR |
|
Image |
|
|
|
|
|
Wavelength |
— |
— |
850nm |
1310nm |
|
Max Distance |
30m@Cat6a/7 |
80m@Cat6a/7 |
300m |
2km |
|
Cable Type |
Copper |
Copper |
OM3/OM4 MMF |
OS2 SMF |
|
Connector |
RJ45 |
RJ45 |
LC Duplex |
LC Duplex |
|
Tx Power(dBm) |
— |
— |
-6.5~-0.5 |
-8.2 ~ -0.5 |
|
Rx Sensitivity |
— |
— |
-11.1 |
-12.6 |
|
Power Consumption |
<2.5W |
<2.5W |
<0.8W |
<0.8W |
|
Source |
— |
— |
VCSEL + PIN |
FP + PIN |
|
Operating Temperature |
0 to 70°C -40 to 85°C (IND) |
0 to 70°C |
0 to 70°C |
0 to 70°C |
|
Part Number |
FT-SFP+-LR |
FT-SFP+-ER |
FT-SFP+-ZR |
FT-SFP+-ZR+ |
|
Image |
|
|
|
|
|
Wavelength |
1310nm |
1550nm |
1550nm |
1550nm |
|
Max Distance |
10km |
40km |
80km |
100km |
|
Cable Type |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
|
Connector |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
|
Tx Power(dBm) |
-6.5~-0.5 |
-2~4 |
0 ~ 5 |
1 ~ 5 |
|
Rx Sensitivity(dBm) |
-12.6 |
-15.8 |
-24 |
-25 |
|
Power Consumption |
<0.8W |
<1.5W |
<1.5W |
<1.5W |
|
Source |
DFB + PIN |
EML + PIN |
EML + APD |
EML + APD |
|
Operating Temperature |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
About F-tone Networks
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.