1 2

10m (33ft) CS UPC to CS UPC Duplex OS2 2.0mm Fiber Optic Patch Cable, LSZH, for 200G/400G/800G Connections

10m (33ft) CS UPC to CS UPC Duplex OS2 2.0mm Fiber Optic Patch Cable, LSZH, for 200G/400G/800G Connections

Specifications

10m (33ft) CS UPC to CS UPC Duplex OS2 2.0mm Fiber Optic Patch Cable, LSZH, for 200G/400G/800G Connections

  

These CS to CS cables incorporate Low Smoke Zero Halogen (LSZH) material to minimize smoke and halogen emissions. They support wavelengths ranging from 1310nm to 1550nm and boast an insertion loss of just 0.3dB.

 

The CS Connector represents a advancement in optical connectivity, offering a smaller size compared to LC duplex connectors while simultaneously delivering enhanced performance. It is engineered for high-density fiber patching in 200/400/800G data centers, aiming to save space and alleviate cable management issues.

  

Connector Type CS to CS Polish Type UPC to UPC
Fiber Count Duplex Fiber Type OS2 SMF 9/125μm
Cable Material LSZH Fiber Grade G.652D
Insert Loss ≤0.3dB Return Loss ≥50dB
Approximate Diameter 2.0mm Wavelength 1310/1550nm
Minimum Bend Radius 10mm Length 1m/2m/3m/4m/5m/6m/7m/8m/10m/12m/15m/20m
Operating Temperature -10~70°C Storage Temperature -20~70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all