Skip to product information
1 of 2

12m (39ft) MTP-16 (Female) to MTP-16 (Female) OM4 Elite Trunk Cable, 16 Fibers, Type B, LSZH

12m (39ft) MTP-16 (Female) to MTP-16 (Female) OM4 Elite Trunk Cable, 16 Fibers, Type B, LSZH

Compatible

QSFP+, QSFP28 and QSFP56 modules\n5. Compliant to QSFP-DD MSA, IEEE 802.3bs and 400GAUI-8\/CEI-56G-VSR-PAM4","remark":"

Specifications

12m (39ft) MTP-16 (Female) to MTP-16 (Female) OM4 Elite Trunk Cable, 16 Fibers, Type B, LSZH

 

The MTP trunk cable provides a worry-free and cost-effective solution for high-density cabling for its connector delivering up to 6 times the density of a standard duplex fiber optic cable connector. This 16 fibers MTP female to MTP female OM4 multimode mode trunk cable is specially optimized for 400G optics direct connection, data centers and telecommunications systems applications. 

 

Connector A MTP Female Connector B MTP Female
Fiber Count 16 Fibers Fiber Type OM4 MMF 50/125μm
Polish Type APC to APC Wavelength 850/1300nm
Armoured No Cable Material LSZH
Insert Loss ≤0.35dB Return Loss ≥20dB
Approximate Diameter 3.0mm Minimum Bend Radius 7.5mm
Attenuation at 850nm ≤2.3dB/km Attenuation at 1300nm ≤0.6dB/km
Tensile (Long/Short Term) 80/150N Crush (Long/Short Term) 100/500 N/10cm
Operating Temperature -10~70°C Storage Temperature -20~70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests