Skip to product information
1 of 10

14PIN Butterfly Analog Laser

14PIN Butterfly Analog Laser

14PIN Butterfly Analog Laser

Features
●DT14, 14 Pin butterfly package
●Analog chip design, suitable for CATV
●High power
●Wide temperature range
●DWDM or CWDM wavelength
Applications
●Optical Source
●CATV
●Test and measurement
●ROF Module
●WDM
Absolute Maximum RatingsElectrical and Optical Characteristics (@25°C)Note:①The operating temperature is 85 ˚C, the laser temperature needs to be adjusted to 35 ˚C to maintain good temperature control performance, and the DWDM wavelength needs to be adjusted by adjusting the laser temperature . ②wavelength selection reference selection table.
RF PeculiarityNote:③Input impedance can be selected from 25ohm and 50ohm 
Fiber SpecificationElectrical Schematic and PIN Definitions Mechanical Drawing and Pin Definitions (unit: mm) Heat Dissipation Requirements
In order to ensure proper performance, heat sinking and heat removal must be provided by the user to limit maximum temperature of the device.  Ordering Information 
FT-79-OD-LSExxxDF-OW61 14PIN butterfly laser with FC/APC connector, 50ohm impedance match 
FT-79-OD-LSExxxDF-OW62 14PIN butterfly laser with FC/APC connector, 25ohm impedance match

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests