1 2

16ft (5m) Blue Cat7 Snagless Shielded (SFTP) Ethernet Network Patch Cable, 26AWG, 10GBase-T

16ft (5m) Blue Cat7 Snagless Shielded (SFTP) Ethernet Network Patch Cable, 26AWG, 10GBase-T

Compatible

Current and Future Category 7/6a/6/5e/5 Applications

Specifications

Cat7 Snagless Shielded (SFTP) Ethernet Network Patch Cable, 26AWG, 10GBase-T

               

The Cat7 Snagless Shielded (SFTP) patch cable is equipped with 26AWG , with a high-performance modular plug at both ends. Its snagless design safeguards the RJ45 connectors' locking clips from any harm or breakage during installation. This cable surpasses the Cat7 Ethernet network cable standard, providing a cost-effective solution for indoor Gigabit Ethernet data center applications, and supports up to 10GBase-T and 600MHz within 100 meters of cable.

                    

Cable Type Cat7 Snagless Shielding Type Shielded (SFTP)
Cable Outer Jacket PVC Length 16ft (5m) (Including Plugs)
Data Rate 10GBase-T Maximum (Tested) Frequency 600MHz
Conductor Type Stranded Twisted Pairs 4 Pairs
Gauge (AWG) 26 (7/0.16mm) Cable Outer Diameter 6.2 ± 0.3
Standard ISO/IEC 11801 Wire Scheme T568B, Straight
Operating Temperature -20 to +75°C (-4 to 167°F) Installation Temperature -10 to +50°C (14 to 122°F)

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all