1 2

1ft (0.3m) Cat8 Ethernet Network Patch Cable Snagless shielded (SFTP), 28AWG, 25/40GBase-T, Black

1ft (0.3m) Cat8 Ethernet Network Patch Cable Snagless shielded (SFTP), 28AWG, 25/40GBase-T, Black

Compatible

routers, switch boxes, network printers, and other devices.

Specifications

Cat8 Snagless Shielded (SFTP) Ethernet Network Patch Cable, 28AWG, 25/40GBase-T

 

The Cat8 SFTP patch cable features 28AWG unshielded twisted pair stranded copper cable with a high-performance modular plug at each end. The snagless design protects the locking clips on the RJ45 connectors from being damaged or snapped off during installation. It exceeds the performance of the Cat6 Ethernet network cable standard and offers a cost-effective solution for indoor data center applications, supporting up to 40Gbps and 2000MHz within 30 meters of cable.

 

Cable Type

Cat8 Snagless

Shielding Type

Shielded

Cable Outer Jacket

PVC

Length

1ft (0.3m) (Including Plugs)

Data Rate

25/40GBase-T

Maximum (Tested) Frequency

2000MHz

Conductor Type

Stranded Pure Bare Copper

Connectors

RJ45 (Male)

Gauge (AWG)

28 (7/0.20mm)

Cable Outer Diameter 

6.0mm ± 0.2mm

PoE Compatibility

PoE/PoE+/PoE++

Wire Scheme

T568B, Straight

Operating Temperature

-20 to +75°C

Installation Temperature

-10 to +50°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all