1 2

1m 16 Fibers MPO to 8x LC Duplex Type B LSZH OM4 Multimode Breakout Cable - F-tone

1m 16 Fibers MPO to 8x LC Duplex Type B LSZH OM4 Multimode Breakout Cable - F-tone

Transceivers Type

SFP Optical Transceiver

Compatible

QSFP+, QSFP28 and QSFP56 modules\n5. Compliant to QSFP-DD MSA, IEEE 802.3bs and 400GAUI-8\/CEI-56G-VSR-PAM4","remark":"

Specifications

1m (3ft) MPO-16 APC (Female) to 8x LC UPC Duplex OM4 Multimode Elite Breakout Harness Cable, 16 Fibers, Type B, LSZH, Magenta

 

The MPO-16 multimode MPO to LC breakout cable converts an MPO connector to 8x LC duplex connectors, providing a cost-effective high-density cabling solution for scenarios where rack space saving and cable management is in concern. This 16 fibers MPO to 8 LC OM4 breakout cable is typically used for patching within a cabinet in data centers applications. It is specially optimized for 400G QSFP-DD SR8 to 50G SFP56 SR interconnect, which allow legacy network smoothly migration to 400G. The 16 fiber MPO-LC harness OM4 cable supports up to 400G data transfer and meet future-proof network requirements.

  

Connector A MPO Female Connector B MPO Female
Fiber Count 16 Fibers Fiber Type OM4 MMF 50/125μm
Polish Type APC to UPC Cable Material LSZH
Armoured No Wavelength 850/1300nm
Insert Loss ≤0.35dB Return Loss ≥30dB
Cable Diameter 3.0mm Tensile Strength 80/150N (Long/Short Term)
Min. Bend Radius (Fiber Core) 7.5mm Min. Bend Radius (Fiber Cable) 20/10D (Dynamic/Static)
Attenuation (dB/km) ≤2.3 at 850nm, ≤0.6 at 1300nm Polarity Type B
Operating Temperature -10℃~ to 70℃ Storage Temperature -40℃ to +85℃

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all