1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+ Ethernet Media Converter

Name: 1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+ Ethernet Media Converter
Brand: F-tone
SKU: FT-100694
Price: 99.99 CNY
Availability: InStock

Transceivers Type

SFP+ Optical Transceiver

Compatible

100+ Vendors\n5. SFP+ MSA Compliant","remark":"

Specifications

10 Gigabit Ethernet Network Media Converter (1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+)

The 10G Base-T to 10G Base-R fiber optic transceivers offer support for two different media network connections: 10GBase-T and 10GBase-FX. These transceivers employ a 10Gbase Ethernet PHY chip design, enabling seamless integration between the two network segments. They can be used as standalone units or integrated as embedded modules in 19-inch converter racks for centralized wiring closets. The manufacturing process follows standard procedures to ensure reliability and safety of the product.

This series of transceivers facilitates the conversion of data signals between twisted pair and optical fiber transmission media, providing a solution for users of long-distance and high-speed Ethernet networks to meet their demands. It is particularly well-suited for telecommunications, broadcasting, and broadband network users, delivering a dependable and secure high-speed Ethernet connection.

Ports	1 x 100M/1G/2.5G/5G/10GBase-T RJ45 Port 1 x 10GBase-X SFP+ Port	Standards and Protocols	IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3an, IEEE 802.3ae, IEEE 802.3x
Cable Type (Fiber)	Multimode 50/125µm, 62.5/125µm Single-mode 9/125µm	Cable Type (Copper)	UTP Cat 5, 5e, 6 Cable (Maximum 100m) EIA/TIA-568 100Ω STP (Maximum 100m)
LED Indicators	TP/LNK, SPD, FX/LNK, PWR	DIP Switch	LFP/ ALS/ FX Speed/FX Reset
Power Consumption	Full-load<5W Without Module≤2W	Jumbo Frame	16k
Operation Mode	10/100Mbps for Half/Full duplex 1000Mbps for Full Duplex	Dimensions (HxWxD)	94mm70mm26mm
MTBF (hrs)	>50,000Hrs	Latency	3us Ultra-low
Operating Temperature	0°C to 50°C	Input Power	DC 5-12V
Relative Humidity	5%~90% (Non-condensation)	Warranty	1 year

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about us Contact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing