1 2

400G QDD-4X100G-LR QSFP-DD Module, Arista QDD-400G-PLR4 Compatible 1310nm 10km with MTP/MPO-12 Connector

400G QDD-4X100G-LR QSFP-DD Module, Arista QDD-400G-PLR4 Compatible 1310nm 10km with MTP/MPO-12 Connector

Transceivers Type

QSFP-DD Optical Transceiver

Specifications

Arista QDD-400G-PLR4 Compatible 4x100GBASE-LR QSFP-DD PAM4 1310nm 10Km DOM Transceiver Module (SMF, 1310nm, 10Km, MTP/MPO, DOM)

 

The Arista QDD-400G-PLR4 400GBASE-PLR4 module is designed to reach 10km distances over single-mode fiber (SMF) for 400 Gigabit Ethernet transmission. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. The 4x100GBASE-LR module uses MTP/MPO-12 connector, supporting breakout mode. It can be applied in the 4x100G breakout connectivity of QSFP-DD to QSFP28 100G-LR. F-tone QDD-4X100G-LR 4x100GBASE-LR QSFP-DD module is compliant with QSFP-DD MSA, 100G Lambda MSA, OIF 56G PAM4, and IEEE 802.3cu for 100GBASE- LR1 and is mainly applied in 400G Ethernet, Data Center and Cloud Networks.

 

Part Number FT-QSFP-DD-PLR4 Vendor Name F-tone
Form Factor QSFP-DD Data Rate 425 Gbps
Wavelength 1310nm Distance 10km
Connector MTP/MPO-12/APC Cable Type SMF
Transmitter Type EML Receiver Type PIN
TX Power -1.9~4.8dBm Receiver Sensitivity <-8.2dBm
Transmitter Type CWDM EML Receiver Type PIN
Power Consumption ≤12W Temperature Range 0 to 70°C (32 to 158°F)
DDM/DOM Supported Forward Error Correction (FEC) Host FEC Supported
Protocols QSFP-DD MSA, IEEE 802.3cu, 400GBASE-PLR4 spec, 100G Lambda MSA, 400GAUI-8/CEI-56G-VSR-PAM4 Warranty 1 Year

Model Contrast Table

Part Number

FT-QSFP-DD-FR4

FT-QSFP-DD-LR4

FT-QSFP-DD-PLR4

FT-QSFP-DD-LR8

FT-QSFP-DD-ER8

Center Wavelength

1310nm

1310nm

1310nm

1310nm

1310nm

Connector

Duplex LC

Duplex LC

MTP/MPO-12

Duplex LC

Duplex LC

Cable Distance (Max.)

2km

10km

10km

10km

40km

Modulation

PAM4

PAM4

PAM4

PAM4

PAM4

Transmitter + Receiver Type

CWDM EML + PIN

CWDM EML + PIN

EML + PIN

LWDM EML + PIN

LWDM EML + APD

TX Power

-3.2~3.5dBm

-2.7~1.5dBm

-1.9~4.8dBm

-2.8~5.3dBm

-0.6~5.6dBm

Receiver Sensitivity

<-7.3dBm

<-9.0dBm

<-8.2dBm

<-9.1dBm

<-16.1dBm (SECQ–17.5dBm)

Power Consumption

≤12W

≤12W

≤12W

≤13W

≤15.4W

Temperature

0 to 70°C (32 to 158°F)

0℃ to 70℃

0℃ to 70℃

0℃ to 70℃

0℃ to 70℃

Application

Data Center

800G to 2x400G Breakout

Data Center

Data Center

400G to 4x100G Breakout

Data Center

Data Center

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all