1 2

400G QSFP-DD QDD-400G-XDR4 Module, Cisco QDD-4X100G-FR-S Compatible 1310nm 2km with MTP/MPO-12 Connector

400G QSFP-DD QDD-400G-XDR4 Module, Cisco QDD-4X100G-FR-S Compatible 1310nm 2km with MTP/MPO-12 Connector

Transceivers Type

QSFP-DD Optical Transceiver

Compatible

100+ Vendors\n5. Hot Pluggable QSFP28 MSA Compliant","remark":"

Specifications

Cisco QDD-4X100G-FR-S Compatible 400GBASE-XDR4 QSFP-DD PAM4 1310nm 2km DOM Optical Transceiver Module (SMF, 1310nm, 2km, MTP/MPO, DOM)

 

QDD-400G-XDR4 400G QSFP-DD optical module, namely QDD-4X100G-FR, or 400GBASE-DR4+, is designed to reach 2km distances over single-mode fiber (SMF). The 400 Gigabit Ethernet signal is carried over four parallel and independent Single Lambda 100G PAM4 lanes. 400GBASE-XDR4 uses MTP/MPO-12 connector, supporting breakout mode. It can be applied in the 4x100G breakout connectivity of QSFP-DD to QSFP28 100G-FR.

 

F-tone QDD-4X100G-FR 400GBASE-DR4+ module is compliant with QSFP-DD MSA, 100G Lambda MSA 400G-DR4+, CMIS 4.0, and IEEE 802.3bs and is mainly applied in 400G Ethernet, Data Center, and Cloud Networks.

 

Model Name FT-QSFP-DD-DR4+ Vendor Name F-tone
Form Factor QSFP-DD Data Rate 425 Gbps
Wavelength 1310nm Distance 2km
Connector MTP/MPO-12/APC Cable Type SMF
Transmitter Type 1310nm EML Receiver Type PIN
TX Power -3.1~4.0dBm Receiver Sensitivity <-7.1dBm
Power Consumption ≤12W Extinction Ratio 3.5dB
DDM/DOM Supported Working Temperature Range 0 to 70°C (32 to 158°F)
Protocols QSFP-DD MSA Compliant Warranty 1 Year

Model Contrast Table

Part Number

FT-QSFP-DD-SR4

FT-QSFP-DD-SR8

FT-QSFP-DD-DR4

FT-QSFP-DD-DR4+

FT-QSFP-DD-FR4

Center Wavelength

850nm

850nm

1310nm

1310nm

1310nm

Connector

MTP/MPO-12

MTP/MPO-16

MTP/MPO-12

MTP/MPO-12

Duplex LC

Cable Distance (Max.)

100m

100m

500m

2km

2km

Modulation

PAM4

PAM4

PAM4

PAM4

PAM4

Transmitter + Receiver Type

VCSEL 850nm + PIN

VCSEL 850nm + PIN

EML + PIN

EML + PIN

CWDM EML + PIN

TX Power

-4.6~4.0dBm

-6.5~4.0dBm

-2.9~4.0dBm

-3.1~4.0dBm

-3.2~3.5dBm

Receiver Sensitivity

<-6.3dBm

<-8.4dBm

<-5.9dBm

<-7.1dBm

<-7.3dBm

Power Consumption

≤8W

≤12W

≤12W

≤12W

≤12W

Temperature

0 to 70°C (32 to 158°F)

0 to 70°C (32 to 158°F)

0 to 70°C (32 to 158°F)

0 to 70°C (32 to 158°F)

0 to 70°C (32 to 158°F)

Application

Data Center

Data Center

400G to 2x200G Breakout

400G to 8x50G Breakout

Data Center

400G to 4x100G Breakout

800G to 2x400G Breakout

Data Center

400G to 4x100G Breakout

800G to 2x400G Breakout

Data Center

800G to 2x400G Breakout

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all