40CH DWDM Mux Demux, 100GHz C20-C59 Wavelength Multiplexer/Demultiplexer - F-tone
40CH DWDM Mux Demux, 100GHz C20-C59 Wavelength Multiplexer/Demultiplexer - F-tone
Transceivers Type
SFP Optical Transceiver
Compatible
Cisco, Juniper, Arista, etc. Get 10G SFP+ DWDM price and datasheet now. ","descriptionBom":"","summary":"","descriptionPc":"","descriptionPhone":"","deliverTemplateId":"","leadTime":null,"madeIn":"","bugMin":0,"packageMin":1,"packaging":"","strategy":"","saleState":1,"saleNum":121,"biaoPrice":null,"salePriceUnit":"","saleUnit":"","productLine":null,"startTime":null,"endTime":null,"publishTime":null,"videoAlbun":"","shortTitle":"DWDM-SFP+-ER-XX C20","videoImage":"","buyUrl":"","discountStartTime":null,"discountEndTime":null,"priceExplain":"","cornerMark":"","productHighlights":"1. Rate: 10G; Connector: Duplex LC\n2. DFB+PIN; Low Power Consumption
Specifications
40 Channels Passive DWDM Mux Demux With 1310nm and Monitor Port, 100GHz Spacing, ITU Wavelengths C20-C59, Dual Fiber
The 40 channels DWDM Mux Demux contains a 40-channel fiber optic multiplexer and a 40-channel optical demultiplexer, supporting signal multiplexing and demultiplexing in 100GHz channel spacing DWDM systems. Based on AAWG (Athermal Arrayed Waveguide Grating) technology, the DWDM Mux Demux device combines 40-channels of 100GHz ITU wavelengths to a denser DWDM signal and separate the combined DWDM signal into 40-channels of ITU wavelengths over a pair of single-mode optical fiber. DWDM Mux Demux is fully passive and requires no power supply and temperature control. It is also easy to be installed on 1U 19-inch standard racks without moving parts, thus recognized as an ideal and cost-effective solution for point-to-point data center interconnections.
| Wavelength |
40 channels C20-C59 |
Channel Spacing: |
100GHz (0.8nm) |
| Center Wavelength Accuracy: |
±0.05nm |
Channel Passband: |
±0.11nm |
| Filter Technology: |
AAWG (Athermal Arrayed Waveguide Grating) |
Passband Ripple: |
≤ 1.5dB |
| Insertion Loss: |
≤ 3.5dB |
Return Loss: |
≥ 40dB |
| Drop Adjacent Channel Isolation: |
≥ 25dB |
Drop nonadjacent channel isolation |
≥ 29dB |
| Polarization Dependent Loss (PDL) |
≤ 0.3dB |
Polarization Mode Dispersion (PMD): |
≤ 0.1ps |
| Operating Temperature Range: |
-5 to 65°C (23 to 149°F) |
Storage Temperature Range: |
-40 to 85°C (-40 to 185°F) |
| Power Handling: |
≤ 23dBm |
Dimensions (HxWxD): |
1.73"x19"x10.28" (44x481.8x261.2mm) |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
Share

About F-tone Networks
F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.
Featured collection
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00