40CH DWDM Mux Demux, 100GHz C21-C60 Wavelength Multiplexer/Demultiplexer - F-tone

Name: 40CH DWDM Mux Demux, 100GHz C21-C60 Wavelength Multiplexer/Demultiplexer - F-tone
Brand: F-tone
SKU: FT-100168
Price: 99.99 CNY
Availability: InStock

Transceivers Type

SFP Optical Transceiver

Compatible

Cisco, Juniper, Arista, etc. Get 10G SFP+ DWDM price and datasheet now. ","descriptionBom":"","summary":"","descriptionPc":"","descriptionPhone":"","deliverTemplateId":"","leadTime":null,"madeIn":"","bugMin":0,"packageMin":1,"packaging":"","strategy":"","saleState":1,"saleNum":264,"biaoPrice":null,"salePriceUnit":"","saleUnit":"","productLine":null,"startTime":null,"endTime":null,"publishTime":null,"videoAlbun":"","shortTitle":"DWDM-SFP+-ER-XX C21","videoImage":"","buyUrl":"","discountStartTime":null,"discountEndTime":null,"priceExplain":"","cornerMark":"","productHighlights":"1. Rate: 10G; Connector: Duplex LC\n2. DFB+PIN; Low Power Consumption

Specifications

40 Channels Passive DWDM Mux Demux With 1310nm and Monitor Port, 100GHz Spacing, ITU Wavelengths C21-C60, Dual Fiber

The 40 channels DWDM Mux Demux contains a 40-channel fiber optic multiplexer and a 40-channel optical demultiplexer, supporting signal multiplexing and demultiplexing in 100GHz channel spacing DWDM systems. Based on AAWG (Athermal Arrayed Waveguide Grating) technology, the DWDM Mux Demux device combines 40-channels of 100GHz ITU wavelengths to a denser DWDM signal and separates the combined DWDM signal into 40-channels of ITU wavelengths over a pair of single-mode optical fiber. DWDM Mux Demux is fully passive and requires no power supply and temperature control. It is also easy to be installed on 1U 19-inch standard racks without moving parts, thus recognized as an ideal and cost-effective solution for point-to-point data center interconnections.

Wavelength	40 channels C21-C60	Channel Spacing:	100GHz (0.8nm)
Center Wavelength Accuracy:	±0.05nm	Channel Passband:	±0.11nm
Filter Technology:	AAWG (Athermal Arrayed Waveguide Grating)	Passband Ripple:	≤ 1.5dB
Insertion Loss:	≤ 3.5dB	Return Loss:	≥ 40dB
Drop Adjacent Channel Isolation:	≥ 25dB	Drop nonadjacent channel isolation	≥ 29dB
Polarization Dependent Loss (PDL)	≤ 0.3dB	Polarization Mode Dispersion (PMD):	≤ 0.1ps
Operating Temperature Range:	-5 to 65°C (23 to 149°F)	Storage Temperature Range:	-40 to 85°C (-40 to 185°F)
Power Handling:	≤ 23dBm	Dimensions (HxWxD):	1.73"x19"x10.28" (44x481.8x261.2mm)

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about us Contact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing