Skip to product information
1 of 10

6GHz DSFP-RF 2T2R Analog Optical Transceiver

6GHz DSFP-RF 2T2R Analog Optical Transceiver

6GHz DSFP-RF 2T2R Analog Optical Transceiver 

Features
● Two optical transmitter and two optical receiver integrated
● Innovative design of golden finger for RF transmission
● Pluggable LC/PC optical connector
● Wide operating frequency from 100MHz to 6GHz
● Automatic optical power control
● Both Tx and Rx have optical power monitoring function
● High dynamic input and output range
● I2C interface
● Low power consumption
Applications
● Distributed antenna system
● WiMAX /Wi-Fi/ 4G / 5G/ 6G
● Mobile backhaul
● GPS/BEIDOU signal transport
● Antenna remoting
NoteOperation beyond these absolute maximum conditions may degrade device performance, lead to device failure, shorter lifetime, and will invalidate the device warranty
Typical SpecificationNote: (1) Test with 1-meter SMF-28 fiber, without amplify.
Connector and Interface

Register Defines 
Please Contact F-tone Networks Sales for the register file.
Heat Dissipation Requirements and Laser radiation warning
In  order  to ensure  proper performance, heat  sinking and  heat  removal must be provided by the user to limit maxim um temperature of the module  The maximum laser power is 0.5 watt(Class BⅡ). The user should avoid direct exposure to beamMechanical (unit: mm)
● Cover design refer to SFF-8432 Rev 5.0 
● Tap requirement refer to SFF-8432 Rev 5.0, pull force >12.5N 
● Optical port refers to IEC61754-20-2002
Ordering Information

Note
(1) Other wavelengths can be customized; 
(2) Other types of optical fiber connector type can be customized. 
(3) see the Connector and Interface part(2):“The relative position of Tx1/Rx1 and Tx2/Rx2 optical direction” for more details.

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests