Skip to product information
1 of 2

8 Slot 2U Managed Chassis Platform Unloaded for OTN Transmission - F-tone

8 Slot 2U Managed Chassis Platform Unloaded for OTN Transmission - F-tone

Transceivers Type

SFP Optical Transceiver

Specifications

Highly Integrated, Optoelectronic Integration 2U Managed Chassis

 

The QT900 series 2U network management chassis supports up to 8x 400G Electric layer boards, up to a maximum capacity of 3.2Tbit/s. It supports ZTP installation and can be used after installation without configuration. All boards, power supplies, and fans support hot swapping. The platform supports multiple service types, including s 10GE, 100GE, 100GE FlexE (pass-through mode), 400GE, STM-64, 10GE WAN, OTU2, OTU4, etc. The network management platform supports CLI, NETCONF and B/S based GUI, with flexible management methods.

 

Slot Count 8 Enclosure Type Rack Mountable
Management Type

Main Controller Board

CLI, NETCONF and B/S based GUI

OSC based DCN Communication

Protection Function

OLP

OMSP

OCHP

Max. Number of Wavelengths Fixes Grid: 96 Wavelengths @ 50GHz Max. Capacity 3.2Tbit/s
Board Hot Pluggable Supports Dimensions(HxWxD) 88mm x 446mm x 450mm
Power Supply

1+1 redundant power

100 V AC~130 V AC (50/60Hz)

200 V AC~240 V AC (50/60Hz)

-48/-60V DC(Rated)

-40/-72V DC(Max.)

Power Consumption < 1100W (Electric Layer Full Match)
Operating Temperature

Short-term: -5℃~+45℃

Long-term: 0℃~40℃

Storage Temperature -40 to 70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests