1 2

8CH CWDM Mux Demux, 1270-1450nm(Skip 1390, 1410nm) Wavelength Multiplexer/Demultiplexer - F-tone

8CH CWDM Mux Demux, 1270-1450nm(Skip 1390, 1410nm) Wavelength Multiplexer/Demultiplexer - F-tone

Transceivers Type

SFP Optical Transceiver

Compatible

100+ Vendors\t\n5. SFP+ MSA Compliant\t","remark":"

Specifications

8 Channels Passive CWDM Mux Demux, High-band of 1270-1450nm(skip 1390-1410nm), Dual Fiber Plug-in Module, with Monitor and Expansion Port

 

The 8CH CWDM Mux Demux contains an 8-channel fiber optic multiplexer and an 8-channel optical demultiplexer. Based on free-space technology, it combines 8-channels of CWDM wavelengths into a composite signal and separates the combined CWDM signal into 8-channels individual wavelengths ​over a pair of single-mode optical fiber. F-tone 8CH CWDM Mux Demux integrated with a monitor port and an expansion port. The 1% monitor port allows easy troubleshooting without downtime and the expansion port supports expanding the capacity of existing fiber infrastructure. F-tone is also devoted to providing maximally low insertion loss, the Max insertion loss is only 2.4dB. And the device is fully passive with no power supply and temperature control requirements. It is also easy to be installed on FMU 2-slot 1U 19-inch racks. It is recognized as an ideal and cost-effective solution for building point-to-point networks with limited scale requirements.

 

 

Wavelength:

 8 Channels 1270-1450nm

Channel Spacing:

 20nm

Expansion Port Passband:

1260nm~1457nm

Channel Passband:

±0.11nm

Insertion Loss:

≤ 2.4dB

Insertion Loss(Monitor Port):

≤ 24.3dB

Insertion Loss(Expansion Port):

≤ 2.4dB

Technology:

 Free Space

Drop Adjacent Channel Isolation:

 ≥ 30dB

Drop nonadjacent channel isolation:

≥ 40dB

Passband Ripple:

≤ 0.5dB

Return Loss:

 ≥ 45dB

Polarization Dependent Loss (PDL)

 ≤ 0.3dB

Polarization Mode Dispersion (PMD):

≤ 0.1ps

Operating Temperature Range:

-5 to 65°C (23 to 149°F)

Storage Temperature Range:

 -40 to 85°C (-40 to 185°F)

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all