1 2

Generic Compatible 400G DWDM Tunable Coherent CFP2 DCO 450km DOM Duplex LC SMF Transceiver Module-F-tone

Generic Compatible 400G DWDM Tunable Coherent CFP2 DCO 450km DOM Duplex LC SMF Transceiver Module-F-tone

Transceivers Type

SFP Optical Transceiver

Specifications

Generic Compatible 400G Tunable DWDM Coherent CFP2-DCO Transceiver (DWDM, 450KM, LC, DOM ）

 

The Generic 400G DWDM Coherent CFP2-DCO transceiver supports flex-grid DWDM tuning, covering a wide range of 96 tunable wavelengths from 1572.06nm to 1524.69nm. It ensures reliable 400G Base-DCO throughput over single-mode fiber (SMF) for distances up to 450km, using an LC connector and PM-16QAM Modulation. With digital optical monitoring (DOM) functionality, these transceivers allow real-time access to operational parameters, fully complying with CFP2 MSA standards and seamlessly integrating into line-side trunk DWDM data center interconnect (DCI) and OTU4/OTUCn metro optical transport networks.

Part Number DWDM-CFP2-450KM Vendor Name F-tone
Form Factor CFP2 Max Data Rate 400Gbps
Grid Spacing 50GHz/75GHz (200G)
75GHz/100GHz(400G) 		Frequency Range 191.1 to 196.15THz
Optical channels 64/96 (200G)
48/64 (400G) 		Tunable Wavelength 1572.06nm~1524.69nm
Transmission Protocols 100G/200G/400G/OTU4/OTUCn Max Cable Distance 450KM
Connector Duplex LC Media SMF
Tx output power -6.5~-0.5dBm (PM-16QAM/PM-16QAM PS)
-6.5~-2.5dBm (PM-QPSK） 		Input Power Range -18~0dBm
Line Modulation PM-16QAM (400G/200G), PM-16QAM PS (200G), PM-QPSK (200G) Power Consumption ≤28W
Host FEC Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
Protocols CFP2 MSA Hardware Specification 1.0 with modifications compliant
CFP MSA Management Interface Specification 2.2 with modifications compliant
IEEE 802.3bm, OIF CEI-28G VSR, OIF CEI-56G VSR PAM-4 		Warranty 1 Year

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all