H3C QSFP-100G-BIDI-MM850 Compatible 100m LC MMF DDM Optical Transceiver-F-tone

Name: H3C QSFP-100G-BIDI-MM850 Compatible 100m LC MMF DDM Optical Transceiver-F-tone
Brand: F-tone
SKU: FT-101805
Price: 99.99 CNY
Availability: InStock

Transceivers Type

SFP Optical Transceiver

Specifications

H3C QSFP-100G-BIDI-MM850 Compatible 40G/100G QSFP BIDI Transceiver Module (850nm & 900nm MMF 100m LC DDM)

The H3C QSFP-100G-BIDI-MM850 compatible 40G/100G QSFP28 BIDI module is a versatile optical solution, supporting both 40Gb/s and 100Gb/s bit rates. This module, designed in a parallel Quad Small Form-factor Pluggable (QSFP28) Bi-Directional format, efficiently integrates four host electrical data streams into two optical lanes. It achieves this through the use of Dual Wavelength VCSEL Bi-Directional Optical Interface, utilizing wavelengths at 850nm and 900nm. This innovative design enables seamless optical communication over a 2-fiber duplex LC optical multi-mode fiber.

Part Number	FT-QSFP-40/100-SRBD	Vendor Name	F-tone
Form Factor	QSFP28	Data Rate	40Gbps/100Gbps
Wavelength	850nm & 900nm	Distance	100m
Connector	Duplex LC	Cable Type	MMF
Transmitter	850/900nm VCSEL	Receiver Type	PIN
TX Power(100G)	6.0 to +4.0 dBm (100G) -4.0 to +5.0 dBm (40G)	Receiver Sensitivity(100G)	<-7.9.0 dBm (100G) <-6.0.0 dBm (40G)
Protocols	100G Ethernet, QSFP28 MSA, SFF-8636	Warranty	5 Years

Model Contrast Table

Part Number	FT-QSFP28-SR4	FT-QSFP28-PSM4	FT-QSFP28-IR4	FT-QSFP28-LR4	FT-QSFP28-CWDM-LR4	FT-QSFP28-ER4 (Rx SOA)	FT-QSFP28-ZR4	DWDM-QSFP28-ZR-XX
Wavelength	850nm	1310nm	1271~1331nm	1310nm	1271~1331nm	1310nm	1310nm	DWDM CH13~60
Max Distance	100m	500m	2km	10km	10km	40km	80km	80km
Cable Type	OM3/OM4 MMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF
Connector	MPO/MTP-12	MPO/MTP-12	LC Duplex	LC Duplex	LC Duplex	LC Duplex	LC Duplex	CS Duplex
Tx Power(dBm)	-8.4~+2.4	-9.4~+2	-6.5~+2.5	-4.3~+4.5	-6.5~+2.5	-2.9~+4.5	+2~+7	-1~+4
Rx Sensitivity(dBm)	-10.3	-12.66	-11.5	-10.6	-11.5	-20.9	-27	-12.5
Max Power Consumption	3.5W	3.5W	3.5W	4W	3.5W	4.5W	5.5W	5W
Source	VCSEL+PIN	DFB+PIN	CWDM DFB+ PIN	EML+PIN	CWDM DFB +PIN	4x EML+SOA+PIN	EML+SOA+PIN	EML+APD
Operating Temperature	0~70°C	0~70°C	0~70°C	0~70°C -40~85°C (Available)	0~70°C	0~70°C -20~85°C (Available)	0~70°C -40~85°C (Available)	0~70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about us Contact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing