H3C QSFP-40G-ER4-WDM1300 Compatible 40G QSFP+ ER4 Transceiver Module-F-tone
H3C QSFP-40G-ER4-WDM1300 Compatible 40G QSFP+ ER4 Transceiver Module-F-tone
Transceivers Type
QSFP+ Optical Transceiver
Compatible
100+ Vendors
Specifications
H3C QSFP-40G-ER4-WDM1300 Compatible 40G QSFP+ ER4 Transceiver Module (1310nm SMF 40km LC DDM)
The QSFPP-40G-ER4 transceiver module is designed for optical communication over distances of up to 40 kilometers, in compliance with the IEEE P802.3ba 40GBASE-ER4 standard. This module efficiently converts four 10Gb/s electrical data input channels into individual CWDM optical signals, which are then multiplexed into a single 40Gb/s optical transmission channel. Similarly, on the receiving end, it demultiplexes a 40Gb/s input signal into four CWDM channels, converting them into a four-channel electrical data output. This bidirectional capability ensures reliable communication over extended distances.
| H3C Compatible | QSFP-40G-ER4 | Vendor Name | F-tone |
| Form Factor | QSFP+ | Max Data Rate | 40Gbps |
| Wavelength | 1271nm, 1291nm 1311nm, 1331nm |
Max Distance | 40km |
| Connector | LC Duplex | Transmitter Type | 4 Lanes CWDM DFB |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | -3.7~4.5dBm | Receiver Sensitivity | < -22dBm |
| Protocols | OTN OTU3, 40G Ethernet, Infiniband, Fiber Channel, SATA/SAS3, MSA Compliant, SFF-8436 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Model Contrast Table
| Part Number |
FT-QSFP+-SR4 |
FT-QSFP+-IR4 |
FT-QSFP+-PSM4 |
FT-QSFP+-LR4 |
FT-QSFP+-LR4-20 |
FT-QSFP+-ER4 |
FT-QSFP+-ZR4 |
| Wavelength |
850nm |
CWDM |
1310nm |
CWDM |
CWDM |
CWDM |
LWDM 1294~1310nm |
| Max Distance |
150m |
2km |
10km |
10km |
20km |
40km |
80km |
| Cable Type |
OM3/OM4 MMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
| Connector |
MPO/MTP-12 |
LC Duplex |
MPO/MTP-12 |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
| Tx Power(dBm) |
-7 ~ 1 |
-7 ~ 2.3 |
-6 ~ -1 |
-7 ~ 2.3 |
-4 ~ 2.3 |
-2.7 ~ 4.5 |
-2.7 ~ 4.5 |
| Rx Sensitivity(dBm) |
-9.5 |
-11.5 |
-14.4 |
-13.7 |
-11.5 |
-19 |
-28 |
| Power Consumption |
<0.7W |
<2.5W |
<2.5W |
< 2.5W |
<3.5W |
<3.5W |
<5W |
| Source |
VCSEL + PIN |
DFB + PIN |
4xDFB + PIN |
DFB + PIN |
DFB + PIN |
DFB + PIN |
4xDFB + APD |
| Operating Temperature |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
Share

About F-tone Networks
F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.
Featured collection
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00