1 2

Juniper Compatible 100GBASE-BX30-U BiDi QSFP28 1304nm-Tx/1309nm-Rx 30km Transceiver Module - F-tone

Juniper Compatible 100GBASE-BX30-U BiDi QSFP28 1304nm-Tx/1309nm-Rx 30km Transceiver Module - F-tone

Transceivers Type

QSFP28 Optical Transceiver

Compatible

almost all OEM devices.

Specifications

Juniper Compatible 100GBASE-BX30-U BiDi QSFP28 Transceiver Module (SMF, 1304.58nm-Tx/1309.14nm-Rx, 30km, Simplex LC, DDM)

 

The Juniper compatible 100GBASE-BX30-U BiDi QSFP28 optical transceiver is equipped with an LC simplex connector, reaching a link up to 30km over simplex SMF. This 100G BiDi QSFP28 transceiver, features carrying information in both directions via a single strand, can double your network capacity and save your cable resources. F-tone manufactured 100GBASE-BX BiDi SFP+ transceiver module is compliant with QSFP28 MSA, 100G-LR1-20, 100G-ER1-30 and 100G-ER1-40 Technical Specifications, SFF-8636 & SFF-8679 standard. Besides, DDM (digital diagnostics monitoring) function is supported on the 100G fiber optic transceiver to achieve real-time operating parameters monitoring. It's also fully compatible with almost all OEM devices.

 

Part Number QSFP28-100G-BX30-U Vendor Name: F-tone
Form Factor: QSFP28 Data Rate: 103.125Gbps
Wavelength: 1304.58nm-Tx/1309.14nm-Rx Distance: 30km
Connector: LC Simplex Cable Type: OS2 SMF
Transmitter Type:
EML
Receiver Type:
APD
TX Power: 0-5.6dBm Receiver Sensitivity: < -14.7dBm
Power Consumption: <4.5W Modulation Format: NRZ
DDM: Support Extinction Ratio ＞5dB
Protocols: QSFP28 MSA, 100G-LR1-20, 100G-ER1-30 and 100G-ER1-40 Technical Specifications, SFF-8636 & SFF-8679 Warranty: 5 Years

 

Model Contrast Table

Part Number

FT-QSFP28-SR4

FT-QSFP28-PSM4

FT-QSFP28-IR4

FT-QSFP28-LR4

FT-QSFP28-CWDM-LR4

FT-QSFP28-ER4 (Rx SOA)

FT-QSFP28-ZR4

DWDM-QSFP28-ZR-XX

Wavelength

850nm

1310nm

1271~1331nm

1310nm

1271~1331nm

1310nm

1310nm

DWDM CH13~60

Max Distance

100m

500m

2km

10km

10km

40km

80km

80km

Cable Type

OM3/OM4 MMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

Connector

MPO/MTP-12

MPO/MTP-12

LC Duplex

LC Duplex

LC Duplex

LC Duplex

LC Duplex

CS Duplex

Tx Power(dBm)

-8.4~+2.4

-9.4~+2

-6.5~+2.5

-4.3~+4.5

-6.5~+2.5

-2.9~+4.5

+2~+7

-1~+4

Rx Sensitivity(dBm)

-10.3

-12.66

-11.5

-10.6

-11.5

-20.9

-27

-12.5

Max Power Consumption

3.5W

3.5W

3.5W

4W

3.5W

4.5W

5.5W

5W

Source

VCSEL+PIN

DFB+PIN

CWDM DFB+ PIN

EML+PIN

CWDM DFB +PIN

4x EML+SOA+PIN

EML+SOA+PIN

EML+APD

Operating Temperature

0~70°C

0~70°C

0~70°C

0~70°C

-40~85°C (Available)

0~70°C

0~70°C

-20~85°C (Available)

0~70°C

-40~85°C (Available)

0~70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all