Nokia Compatible 400G QSFP-DD SR8 Transceiver Module - F-tone
Nokia Compatible 400G QSFP-DD SR8 Transceiver Module - F-tone
Transceivers Type
QSFP-DD Optical Transceiver
Compatible
QSFP+, QSFP28 and QSFP56 modules
Specifications
Nokia Compatible 400G QSFP-DD SR8 PAM4 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO-16 Connector, DOM)
The 400G QSFP-DD SR8 optical module supports speed up to 425Gbps, short-range distance reach up to 100m over 16 parallel multimode fiber (MMF) OM4. 400GBASE SR8 QSFP-DD has an MTP/MPO-16 connector. 400G SR8 is designed based on PAM4 (Pulse Amplitude Modulation 4-level) modulation technology, DSP (Digital Signal Processing) chip, and QSFP-DD form factor. F-tone 400G QSFP-DD SR8 transceiver is fully compliant with QSFP-DD Multi-Source Agreement (MSA), IEEE 802.3bs protocol, and 400GAUI-8/CEI-56G-VSR-PAM4 standard.
| Part Number | FT-QSFP-DD-SR8 | Vendor Name | F-tone |
| Form Factor | QSFP-DD | Interface Type | SR8 |
| Max Data Rate | 425Gbps (8×53.125Gb/s) | Wavelength | 850nm |
| Connector | MTP/MPO-16/APC | Cable Type | MMF |
| Max Cable Distance | 70m (over OM3) 100m (over OM4) |
Modulation | PAM4 |
| TX Power | -6.5 to 4 dBm | Receiver Sensitivity | <-8.4 dBm |
| Transmitter Type | VCSEL 850nm | Receiver Type | PIN |
| Power Consumption | ≤12W | Temperature Range | 0 to 70°C (32 to 158°F) |
| DDM/DOM | Supported | Forward Error Correction (FEC) | Host FEC Supported |
| Protocols | QSFP-DD MSA, IEEE 802.3bs | Warranty | 1 Year |
Model Contrast Table
| Part Number |
FT-QSFP-DD-SR4 |
FT-QSFP-DD-SR8 |
FT-QSFP-DD-DR4 |
FT-QSFP-DD-DR4+ |
FT-QSFP-DD-FR4 |
| Center Wavelength |
850nm |
850nm |
1310nm |
1310nm |
1310nm |
| Connector |
MTP/MPO-12 |
MTP/MPO-16 |
MTP/MPO-12 |
MTP/MPO-12 |
Duplex LC |
| Cable Distance (Max.) |
100m |
100m |
500m |
2km |
2km |
| Modulation |
PAM4 |
PAM4 |
PAM4 |
PAM4 |
PAM4 |
| Transmitter + Receiver Type |
VCSEL 850nm + PIN |
VCSEL 850nm + PIN |
EML + PIN |
EML + PIN |
CWDM EML + PIN |
| TX Power |
-4.6~4.0dBm |
-6.5~4.0dBm |
-2.9~4.0dBm |
-3.1~4.0dBm |
-3.2~3.5dBm |
| Receiver Sensitivity |
<-6.3dBm |
<-8.4dBm |
<-5.9dBm |
<-7.1dBm |
<-7.3dBm |
| Power Consumption |
≤8W |
≤12W |
≤12W |
≤12W |
≤12W |
| Temperature |
0 to 70°C (32 to 158°F) |
0 to 70°C (32 to 158°F) |
0 to 70°C (32 to 158°F) |
0 to 70°C (32 to 158°F) |
0 to 70°C (32 to 158°F) |
| Application |
Data Center |
Data Center 400G to 2x200G Breakout 400G to 8x50G Breakout |
Data Center 400G to 4x100G Breakout 800G to 2x400G Breakout |
Data Center 400G to 4x100G Breakout 800G to 2x400G Breakout |
Data Center 800G to 2x400G Breakout |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
Share

About F-tone Networks
F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.
Featured collection
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00 -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular priceSale price $0.00