1 2

Nokia QSFP-100G-SRBD Compatible 100GBASE-BXSR BiDi QSFP28 Transceiver Module - F-tone

Nokia QSFP-100G-SRBD Compatible 100GBASE-BXSR BiDi QSFP28 Transceiver Module - F-tone

Transceivers Type

QSFP28 Optical Transceiver

Compatible

almost all Nokia devices. Ideal for data centers, campus network, enterprise core layer, etc.

Specifications

Nokia QSFP-100G-SRBD Compatible 100GBASE-BXSR BiDi QSFP28 Bi-Directional Optical Transceiver Module (MMF, 850nm, 100m, Duplex LC, DDM)

 

The NokiaQSFP-100G-SRBD compatible BIDI optical transceiver module is designed with duplex LC connectors, reaching a link up to 100m over OM4 (70m@OM3). With two bi-directional transmitters and receivers carrying 50 Gbps (25 Gbd PAM4), it supports 100 Gigabit Ethernet. F-tone manufactured 100GBASE-BXSR QSFP28 transceiver module complies with IEEE 802.3bm, QSFP28 MSA standard. Besides, the DDM (digital diagnostics monitoring) function is supported on the 100G fiber optic transceiver to achieve real-time operating parameters monitoring. With these features, this 100G BIDI QSFP28 transceiver is widely applied in data centers, campus networks, the enterprise core layer, etc.

 

Part Number QSFP28-BIDI-SR Vendor Name F-tone
Form Factor QSFP28 Max Data Rate 103.1Gbps
Wavelength 850nm Max Cable Distance 70m@OM3/100m@OM4
Connector Duplex LC Cable Type MMF
Transmitter Type VCSEL Receiver Type PIN
DDM/DOM Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
TX Power -5.5 – 3dBm Minimum Receiver Power -9.5dBm
Power budget 4dB Receiver Overload 3.4dbm
Power Consumption ≤3.5W Bit Error Ratio (BER) 5E-5 (Pre-FEC)
Protocols SFF-8636, SFF-8679, SFF-8024 Warranty 5 Years

Model Contrast Table

Part Number

FT-QSFP28-SR4

FT-QSFP28-PSM4

FT-QSFP28-IR4

FT-QSFP28-LR4

FT-QSFP28-CWDM-LR4

FT-QSFP28-ER4 (Rx SOA)

FT-QSFP28-ZR4

DWDM-QSFP28-ZR-XX

Wavelength

850nm

1310nm

1271~1331nm

1310nm

1271~1331nm

1310nm

1310nm

DWDM CH13~60

Max Distance

100m

500m

2km

10km

10km

40km

80km

80km

Cable Type

OM3/OM4 MMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

OS2 SMF

Connector

MPO/MTP-12

MPO/MTP-12

LC Duplex

LC Duplex

LC Duplex

LC Duplex

LC Duplex

CS Duplex

Tx Power(dBm)

-8.4~+2.4

-9.4~+2

-6.5~+2.5

-4.3~+4.5

-6.5~+2.5

-2.9~+4.5

+2~+7

-1~+4

Rx Sensitivity(dBm)

-10.3

-12.66

-11.5

-10.6

-11.5

-20.9

-27

-12.5

Max Power Consumption

3.5W

3.5W

3.5W

4W

3.5W

4.5W

5.5W

5W

Source

VCSEL+PIN

DFB+PIN

CWDM DFB+ PIN

EML+PIN

CWDM DFB +PIN

4x EML+SOA+PIN

EML+SOA+PIN

EML+APD

Operating Temperature

0~70°C

0~70°C

0~70°C

0~70°C

-40~85°C (Available)

0~70°C

0~70°C

-20~85°C (Available)

0~70°C

-40~85°C (Available)

0~70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all