1 2

NVIDIA/Mellanox Compatible 800GBASE-2DR4 QSFP-DD PAM4 1310nm 500m Dual MTP/MPO-12 APC SMF Finned Top Optical Transceiver Module - F-tone

NVIDIA/Mellanox Compatible 800GBASE-2DR4 QSFP-DD PAM4 1310nm 500m Dual MTP/MPO-12 APC SMF Finned Top Optical Transceiver Module - F-tone

Transceivers Type

QSFP-DD Optical Transceiver

Specifications

NVIDIA/Mellanox Compatible 800G QSFP-DD 2x DR4 PAM4 Optical Transceiver Module (1310nm, 500m, 2x MTP/MPO-12 Connectors, SMF, 0℃ to +70℃, DDM)

 

NVIDIA/Mellanox Compatible 800G OSFP 2x DR4 transceiver module supports a max data rate of 850Gbps. It enables the fiber link of 500m over single-mode fiber (SMF) with dual MTP/MPO-12 connectors. The 800 Gigabit Ethernet signal is carried over 1310nm. F-tone manufactured  2x 400GBASE DR4 OSFP complies with IEEE 802.3cu-2021, IEEE 802.3ck-2022, OSFP MSA HW Rev 7.0, CMIS Rev 5.0. DDM (digital diagnostics monitoring) function is supported on the 800G fiber optic transceiver to achieve real-time operating parameters monitoring. Adopting the Pulse-amplitude Modulation (PAM4) modulation, the 2x DR4 OSFP achieves 800 Gigabit Ethernet through 8x 106.25 PAM4 Retimed 8x100GAUI-1 C2M electrical interface. The 800G 2x DR4 OSFP is widely used for 800 gigabit Ethernet, data centers, and 800G to 2x 400G applications.

 

Part Number FT-QSFP-DD-800G-2DR4 Vendor Name F-tone
Form Factor OSFP Max Data Rate 850Gbps (8x 106.25Gbps)
Wavelength 1310nm Distance 500m
Connector Dual MTP/MPO-12/APC Cable Type SMF
Transmitter Type EML Receiver Type PIN
TX Power -2.9 to +4dBm Receiver Sensitivity < -5.9dBm
Packaging Technology COB (Chip on Board) Packaging Receiver Overload 4 dBm
Power Consumption <18W Modulation Format PAM4
DDM/DOM Supported Temperature 0 to 70°C (32 to 158°F)
Protocols IEEE 802.3cu-2021, IEEE 802.3ck-2022, OSFP MSA HW Rev 7.0, CMIS Rev 5.0 Warranty 5 Years

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all