1 2

NVIDIA/Mellanox MMA4Z00-NS400 Compatible 400GBASE-SR4 OSFP Flat Top PAM4 850nm 50m DDM MPO-12/APC MMF Optical Transceiver Module for InfiniBand NDR (IB) and Ethernet (ETH) Used in ConnectX-7/OSFP Adapter Cards

NVIDIA/Mellanox MMA4Z00-NS400 Compatible 400GBASE-SR4 OSFP Flat Top PAM4 850nm 50m DDM MPO-12/APC MMF Optical Transceiver Module for InfiniBand NDR (IB) and Ethernet (ETH) Used in ConnectX-7/OSFP Adapter Cards

Transceivers Type

SFP Optical Transceiver

Specifications

NVIDIA/Mellanox MMA4Z00-NS400 Compatible 400GBASE-SR4 OSFP RHS/Flat Top PAM4 Optical Transceiver Module (850nm, 50m, Single-Port MPO-12/APC Connector, MMF, 0℃ to +70℃, DDM)

 

NVIDIA/Mellanox MMA4Z00-NS400 Compatible 400GBASE-SR4 OSFP is a Flat Top (OSFP-RHS) transceiver module that supports a max data rate of 425 Gbps. It enables the fiber link of 50m over OM4 multi-mode fiber (MMF) with a single 4-channel MPO-12 APC optical connector. Adopting the Pulse-amplitude Modulation (PAM4) electrical and optical modulation, the Short Reach 4-channel (SR4) OSFP achieves 400 Gigabit Ethernet through 4-channels of 100G-PAM4. F-tone manufactured SR4 OSFP complies with 400G InfiniBand NDR, OSFP MSA 5.0, CMIS 4.0, RoHS 2.0, IEEE 802.3ck, IEEE 802.3-2022. The DDM (digital diagnostics monitoring) function is supported on the 400G fiber optic transceiver to achieve real-time operating parameters monitoring. 

 

This single-port 400G SR4 OSFP supports both InfiniBand NDR (IB) and Ethernet (ETH). While not for use in switches, it is designed for insertion into 400Gb/s ConnectX-7/OSFP-based PCIe-bus network cards to twin-port 800G transceivers in 2x400G IB/EN switches. Its most typical application scenario is: A pair of single-port flat top 400G SR4 OSFP (MMA4Z00-NS400) is independently connected to one of the connectors of the twin-port  800G 2x400G 2SR4 OSFP (MMA4Z00-NS) module in a Quantum-2 InfiniBand or Spectrum-4 Ethernet switch. The MMA4Z00-NS400 400G module can operate in either 400Gb/s or 200Gb/s speed modes, depending on the number of connected fiber optic cables. This allows for corresponding connectivity scenarios of 800G to 2x 400GBASE-SR4 and 4x 200GBASE-SR4 breakout applications, respectively.

 

Part Number FT-OSFP-400G-SR4-Flat Vendor Name F-tone
Form Factor Single-port OSFP-RHS/Flat Top Max Data Rate 425Gbps (4x 106.25Gbps)
Wavelength 850nm Distance 30m@OM3/50m@OM4/OM5
Connector MTP/MPO-12/APC Cable Type MMF
Transmitter Type VCSEL Receiver Type PIN PD
TX Power -4.6 to 4 dBm Receiver Sensitivity < -6.4 dBm
Packaging Technology COB (Chip on Board) Packaging Receiver Overload 4 dBm
Power Consumption ≤9W Modulation Format 4x 100G-PAM4 electrical to 4x 100G-PAM4 optical Parallel
DDM/DOM Supported Temperature 0 to 70°C (32 to 158°F)
Protocols 400G InfiniBand NDR, OSFP MSA 5.0, CMIS 4.0, RoHS 2.0, IEEE 802.3ck, IEEE 802.3-2022 Warranty 5 Years

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all