NVIDIA/Mellanox MMS1V00-WM Compatible 400GBASE-DR4 QSFP-DD Transceiver - F-tone

Name: NVIDIA/Mellanox MMS1V00-WM Compatible 400GBASE-DR4 QSFP-DD Transceiver - F-tone
Brand: F-tone
SKU: FT-103838
Price: 99.99 CNY
Availability: InStock

Transceivers Type

QSFP-DD Optical Transceiver

Compatible

almost all NVIDIA/Mellanox devices. Ideal for data centers, campus network, enterprise core layer, etc.

Specifications

NVIDIA/Mellanox MMS1V00-WM Compatible 400GBASE-DR4 QSFP-DD PAM4 Optical Transceiver Module (SMF, 1310nm, 500m, MTP/MPO, DOM)

400GBASE-DR4 QSFP-DD transceiver is designed for 400G Ethernet interconnection, allowing link up length up to 500m over single-mode fiber (SMF) with MTP/MPO connector. It is compliant with the QSFP-DD MSA, IEEE 802.3bs standard. The 400GBASE DR4 module converts 8 channels of 50Gb/s (PAM4) electrical signals into four parallel lanes of optical signals, each lane capable of 100Gb/s. It supports 4x100G breakout to QSFP28 100G-DR transceivers. Utilizing PAM4 modulation technology, 400GBASE-DR4 provides a cost-effective and low power consumption solution for 400G Ethernet applications, data centers, Infiniband interconnects, and high-performance computing networks.

Part Number	FT-QSFP-DD-DR4	Vendor Name	F-tone
Form Factor	QSFP-DD	Interface Type	DR4
Max Data Rate	425Gbps (4x106.25Gb/s)	Wavelength	1310nm
Connector	MTP/MPO-12/APC	Cable Type	SMF
Max Cable Distance	500m	Modulation	PAM4
TX Power	-2.9 to 4 dBm	Receiver Sensitivity	< -5.9 dBm
Transmitter Type	EML	Receiver Type	PIN
Power Consumption	≤12W	Temperature Range	0 to 70°C (32 to 158°F)
DDM/DOM	Supported	Forward Error Correction (FEC)	Host FEC Supported
Protocols	QSFP-DD MSA, IEEE 802.3bs	Warranty	1 Year

Model Contrast Table

Part Number	FT-QSFP-DD-SR4	FT-QSFP-DD-SR8	FT-QSFP-DD-DR4	FT-QSFP-DD-DR4+	FT-QSFP-DD-FR4
Center Wavelength	850nm	850nm	1310nm	1310nm	1310nm
Connector	MTP/MPO-12	MTP/MPO-16	MTP/MPO-12	MTP/MPO-12	Duplex LC
Cable Distance (Max.)	100m	100m	500m	2km	2km
Modulation	PAM4	PAM4	PAM4	PAM4	PAM4
Transmitter + Receiver Type	VCSEL 850nm + PIN	VCSEL 850nm + PIN	EML + PIN	EML + PIN	CWDM EML + PIN
TX Power	-4.6~4.0dBm	-6.5~4.0dBm	-2.9~4.0dBm	-3.1~4.0dBm	-3.2~3.5dBm
Receiver Sensitivity	<-6.3dBm	<-8.4dBm	<-5.9dBm	<-7.1dBm	<-7.3dBm
Power Consumption	≤8W	≤12W	≤12W	≤12W	≤12W
Temperature	0 to 70°C (32 to 158°F)	0 to 70°C (32 to 158°F)	0 to 70°C (32 to 158°F)	0 to 70°C (32 to 158°F)	0 to 70°C (32 to 158°F)
Application	Data Center	Data Center 400G to 2x200G Breakout 400G to 8x50G Breakout	Data Center 400G to 4x100G Breakout 800G to 2x400G Breakout	Data Center 400G to 4x100G Breakout 800G to 2x400G Breakout	Data Center 800G to 2x400G Breakout

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about us Contact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing