1 2

QT860-5T10GSFP, 5 Channels 10G Transponder, SFP+ to SFP+ | F-tone

QT860-5T10GSFP, 5 Channels 10G Transponder, SFP+ to SFP+ | F-tone

Transceivers Type

SFP+ Optical Transceiver

Specifications

QT860-5T10GSFP, 5 Channels 10G Transponder, SFP+ to SFP+，1 Slot

 

Crafted by F-tone, the 10G WDM transponder is equipped with 10 SFP/SFP+ slots and it supports multiple protocols such as 42Mbps-11.3Gbps Ethernet, 1/2/4/8G/10G FC, STM-1/4/16/64, OTU1/OTU2/OTU2e, CRRI etc. It performs 2R regeneration on the incoming signals from 4 arbitrary protocol services, supporting the transparent transmission of any type of service within the 42M to 11.3G rate range. The most common function is to convert 4 client optical signals into 4 Wavelength Division Multiplexing (WDM) standard optical signals, facilitating wavelength multiplexer for the multiplexing of optical signals at different wavelengths.

 

Client Interface SFP/SFP+ Transmission Speed 42Mbps~11.3Gbps
Transceiver Slot Number 10 Client Interface Protocols FE/GE/10GE
1/2/4/8/10G FC
STM-1/4/16/64, OTU1/OTU2/OTU2e
CPRI-1~8
Card Type 10G OTU-2R Latency <2.5μs
Out-Band Management SNMP v2, WEB Power Consumption ＜16w
Operating Temperature -5 to 50°C Storage Temperature -40 to 70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all