1 2

S7600-48Y8C, 48-Port Managed Layer 3+ 25G Ethernet Switch, with 100G QSFP28 Uplinks, Support MLAG, VXLAN - F-tone

S7600-48Y8C, 48-Port Managed Layer 3+ 25G Ethernet Switch, with 100G QSFP28 Uplinks, Support MLAG, VXLAN - F-tone

Transceivers Type

QSFP28 Optical Transceiver

Compatible

100+ Vendors\n5. SFP28 MSA Compliant","remark":"

Specifications

S7600-48Y8C, 48-Port Ethernet L3 Switch, 48x 25G SFP28, 8x 100G QSFP28 Uplinks, Support MLAG, VXLAN

 

F-tone S7600-48Y8C L3 aggregation switch is designed with 48x 25G SFP28 ports and 8x 100G QSFP28 uplinks. This network switch delivers a 4 Tbps switching capacity and 2976 Mpps forwarding rate to meet high-performance aggregation layer requirements. With 2 hot-swap AC power supplies (1+1 redundancy) and 4 hot-swap smart fans, the switch provides hardware redundancy for high reliability.

 

As a layer 3+ managed switch, it supports full layer 3 features (static routing, RIP, OSPF, BGP, etc.) and advanced data center features such as MLAG for high-reliability and VXLAN, NVGRE, GENEVE tunnel technology for virtual networking.

 

S7600 series Aggregation switches support remote direct memory access (RDMA), which over other network APIs for lower latency, CPU load and higher bandwidth. This 48-port 25G switch caters to the Ethernet aggregation platform to HCI (hyper-converged infrastructure), cloud networking, data center, and enterprise applications.

 

Part Number S7600-48Y8C Vendor Name F-tone
Ports 48x 25G SFP28 | 8x 100G QSFP28 Switching Capacity 4 Tbps
MAC Address 122880 Forwarding Rate 2976 Mpps
Number of VLANs 4K ARP Table 16K IPv4
Flash 8GB Memory 2GB
Packet Buffer 36 Mpps Jumbo Frame 9.6K
IPv4 Routes 60K IPv6 Routes 4K
Power Supply 2 hot-swap AC power supplies (default), DC optional Fan Number 4 hot-swap smart fans
Airflow Front-to-Back DHCP Support
Dimensions (H x W x D) 44 x 442 x 422.5 mm
(1.73 x 17.40 x 16.63″) 		Weight 9.2 kg
MTBF >162213 hours Warranty 5 Years
 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

Featured collection

View all