Ubiquiti UF-RJ45-10G-I 10GBASE-T SFP+ Industrial Transceiver Module - F-tone

Name: Ubiquiti UF-RJ45-10G-I 10GBASE-T SFP+ Industrial Transceiver Module - F-tone
Brand: F-tone
SKU: FT-100272
Price: 99.99 CNY
Availability: InStock

Transceivers Type

SFP+ Optical Transceiver

Compatible

100+ Vendors

Specifications

Ubiquiti UF-RJ45-10G-I Compatible 10GBASE-T SFP+ Copper Transceiver Module (30m, RJ45, Industrial)

The Ubiquiti UF-RJ45-10G-I is a copper module equipped with RJ45 connectors that is compatible with Cat6a/Cat7 Ethernet copper cables and transmits 30m at 10GBASE-T data rates. In addition, the 10 Gbps SFP RJ45 module is backward compatible with 1GBASE-T, and intermediate rate 2.5GBASE-T, 5GBASE-T, providing multi-gigabit Ethernet deployment. F-tone manufactured 10GBASE-T SFP+ module is compliant with IEEE 802.3an, IEEE 802.3az, and SFP+ MSA. The 10G RJ45 module uses the electrical signal to transmit data, allowing an upgrade to 10G by reusing existing copper cabling. This 10G SFP+ RJ45 copper transceiver caters to 10 Gigabit Ethernet (10GbE) copper connections, delivering a cost-effective NBASE-T copper solution. It has been tested on host devices to ensure full compatibility with 10G-T ports on Cisco equipment, such as 10GBASE-T switches, enterprise routers, and server network interface cards (NICs). The industrial transceiver has an operating temperature range of -40°C to 85°C, allowing it to operate in harsh industrial environments.

Model Name	FT-SFP+-IT	Vendor Name	F-tone
Form Factor	SFP+	Data Rate	10Gbps
Power consumption	<2.5W	Distance	30m@Cat6a/Cat7
Connector	RJ45	Cable Type	Copper
Protocols	IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8472	Warranty	3 Years

Model Contrast Table

Part Number	FT-SFP+-T FT-SFP+-IT	FT-SFP+-T-80	FT-SFP+-SR	FT-SFP+-IR	FT-SFP+-LR	FT-SFP+-LH	FT-SFP+-ER	FT-SFP+-ZR	FT-SFP+-ZR+
Wavelength	—	—	850nm	1310nm	1310nm	1310nm	1550nm	1550nm	1550nm
Max Distance	30m@Cat6a/7	80m@Cat6a/7	300m	2km	10km	20km	40km	80km	100km
Cable Type	Copper	Copper	OM3/OM4 MMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF	OS2 SMF
Connector	RJ45	RJ45	LC Duplex	LC Duplex	LC Duplex	LC Duplex	LC Duplex	LC Duplex	LC Duplex
Tx Power(dBm)	—	—	-6.5~-0.5	-8.2 ~ -0.5	-6.5~-0.5	-6~-1	-2~4	0 ~ 5	1 ~ 5
Rx Sensitivity(dBm)	—	—	-11.1	-12.6	-12.6	-14.4	-15.8	-24	-25
Power Consumption	<2.5W	<2.5W	<0.8W	<0.8W	<0.8W	< 1W	<1.5W	<1.5W	<1.5W
Source	—	—	VCSEL + PIN	FP + PIN	DFB + PIN	DFB + PIN	EML + PIN	EML + APD	EML + APD
Operating Temperature	0 to 70°C -40 to 85°C (IND)	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

View full details

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about us Contact Us

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing